CREATING A WONDERFUL CLIMATE

Ventilation and air conditioning systems are used to supply fresh air to the premises, maintain comfortable microclimate parameters in them, as well as to clean the air from dust and other contaminants.

The first simple option for a joint solution of air conditioning and ventilation is the use of channel blocks from multi-split systems or from high-performance air conditioners. A big advantage of this solution is the possibility of mixing fresh air into each channel unit. For such cases, when selecting a multi-split system or a high-performance air conditioner, it is necessary to take into account the humidity of the outdoor air, which should either be heated or cooled by the same system in the future. This is probably the cheapest option of all possible solutions.

The second option for a joint solution of air conditioning and ventilation is the installation of a VRF system, which is also a multi-zone system. We can say that this is also a multi-split system, but with broader capabilities and a different organization of the refrigeration circuit. There is also an external unit to which channel indoor units are connected. The blocks are installed either in each room, or one is divided into several rooms. Each duct unit can work both for the recirculation of indoor air in the room, and an air duct can be supplied for the supply of outdoor air for the purpose of ventilation. Such multi-zone systems are currently very common and have a wide range of performance: from a dozen kilowatts to two hundred kilowatts, which allows them to be used in almost all types of premises.

The use of the following system for air conditioning and ventilation is also possible, but already as part of the chiller – fan coil equipment. We will talk about channel-type fan coils, which are also installed indoors, and can work both on air recirculation and with fresh air inflow. There are no restrictions on the number of such fan coils, as, accordingly, there are no restrictions on the number of rooms where they can be installed and serviced by one chiller.

We can say a few words about supply and exhaust installations, which, to some extent, can also solve the issues of ventilation and air conditioning. Such systems operate on partial or full recirculation, and the built-in recuperator partially solves the issue of heating the outside air due to the outgoing warm air.

“SINENERGI” LLC specialists are ready to help you with the concept development, equipment selection, design, installation and commissioning of ventilation and air conditioning systems specifically for your store, office, apartment or country house.
In addition, we carry out a full cycle of work on the implementation of climate systems at facilities of any scale and level of complexity – in shopping malls, airports, hotels, office buildings and business centers, catering establishments and other facilities.

HIGHLY EXPERIENCED SINENERGI

Manual arc welding (MMA).
Manual arc welding is the most popular and in-demand method in the metalworking industry. Manual arc welding technology allows you to perform a wide range of work, from welding metal structures to welding pipelines. With this method, it is possible to perform welds of various types – horizontal, vertical, ceiling. The use of electrodes of different types allows you to work with steel of different grades and thicknesses. We perform welding work at a price that is favorable for our customers, work with a variety of objects and structures.

Manual argon arc welding.
Argon arc welding is a technology of a kind of electric arc welding, which is carried out in an environment of protective inert gas argon to eliminate oxidation of the weld. Melting and non-melting (tungsten) electrodes are used for welding. In the latter case, stainless wire is used to connect metal parts. Among the advantages of the method is the ability to work with sheet metal up to 0.5 mm thick, a strong seam that does not require stripping. We carry out argon welding at prices that will surely suit you.

Semi-automatic welding.
The semi-automatic welding technology ensures high speed of operation, where instead of electrodes, welding wire is used, supplied to the welding zone by an automatic machine. Semi-automatic welding is carried out in a protective environment of carbon dioxide, which protects the metal from oxidation. The semi-automatic welding method provides a high-quality smooth weld, no scale.

Our company offers reliable and professional welding services for metal structures, pipelines, as well as the manufacture and repair of metal products. We take care of every client, so our team of specialists is always focused on results and is ready to fulfill your tasks at the highest level.

We offer welding works of any complexity at an affordable price. Our team consists of highly qualified craftsmen who have extensive experience in this field. We work with various materials such as steel, aluminum, copper and other metals.

We pay special attention to the quality of welding work, so we use only modern equipment and high-quality materials. We guarantee the durability and reliability of the work performed by us.

Types of work:

1. Welding of metal structures:
   This service allows you to connect metal parts together, creating metal structures for various purposes from them.
2. Manufacture of metal products:
   This service allows you to make any metal products according to drawings or sketches of the customer.

Our capabilities allow us to perform a variety of types of welding work, the main advantages and advantages of our offer:

• We have a wide range of welding equipment;
• We employ experienced specialists with a lot of experience;
• We can perform a variety of types of welding;
• We solve non-standard tasks;
• The cost of welding work in our company is one of the lowest in the region.

HIGHLY EXPERIENCED SINENERGI

All these and many other services are offered by our company “SINENERGI” LLC. We employ only qualified electricians, who have many years of experience. A large amount of practical knowledge allows specialists to solve complex tasks quickly and efficiently.

Electrical work does not tolerate amateurs. That is why you should not take up this case yourself, just as you should not seek help from unverified masters. Today, electrician services are offered by numerous private specialists, whose ads can be seen on poles, in newspapers, on the Internet. You can often check the professionalism and quality of the work of such masters only on your own experience. At the same time, mistakes in the work of an electrician can cost you very dearly.

By contacting SINENERGI LLC, you can be sure that all work will be performed at a high level. The company has a license to carry out electrical installation work. All services are guaranteed.

HIGHLY EXPERIENCED SINENERGI

Our company provides a whole range of design services. We are focused on our clients’ outstanding tasks, delivering a quality product in compliance with the stated deadlines.

Our design engineers and design engineers provide competent services for the design of objects, regardless of their degree of complexity.

The Architectural design section includes the development of a complete set of design and technical documentation for buildings of various purposes.

Considerable experience in all aspects of designing ventilation, heating and air conditioning systems allows us to offer the most profitable, safe and effective option for placing equipment based on the customer’s budget, taking into account the aesthetic component of the future project.

A separate niche is devoted to the design of systems of internal electrical equipment and electric lighting for both residential and non-residential premises for various purposes.

Electrical projects are developed in accordance with all standards and allow you to accurately prevent all possible shortcomings, as well as offer an alternative to optimizing energy loss during further operation of facilities.

Trust the professionals

The importance of plumbing in any home or office cannot be overemphasized. Plumbing systems and equipment are improving every year, becoming more convenient and reliable. One thing remains unchanged – only professionally performed plumbing works can ensure long-term and trouble-free operation of the equipment.

SINENERGI LLC offers a full range of plumbing services.

Our advantage over other companies that provide services for the installation of sanitary ware is that we not only perform the installation, but also complete the objects with all the necessary material.

Why is it profitable to work with SINENERGI LLC?

• Guarantees for the work performed 1 year.
• Quality service by specialists with many years of experience.
• Plumbing works are carried out at a convenient time for you. We will make all measurements, consult and, if necessary, make an estimate. Phones are always available.

Do not forget that if you have purchased high-quality and expensive plumbing, need to install cold and hot water supply – for long-term smooth operation of all equipment, you need its competent, professional service plumber for installation and connection.

We will treat your appliances with care and ensure that you can use them comfortably for a long time at a very reasonable price. A careful and attentive craftsman will suggest the most successful solutions and help you with a good choice of accessories and appliances. High quality plumbing services will make you forget about plumbing and drainage problems.

Entrust your plumbing to the experts!

HIGHLY EXPERIENCED SINENERGI

It’s no secret that repair, if you take on it solely on your own, is extremely labor-intensive, costly and often long. Repair can long take away your time, nerves and money, and therefore we offer you to get rid of such a headache and turn to professionals. Our company has long established itself as a responsible and reliable performer of repair and construction works.

We provide a comprehensive range of services:

Plastering and painting works:

• Painting of ceiling, floor and walls
• Whitewashing of the ceiling and walls
• Priming of walls and ceilings
• Sanding of walls and ceiling
• Puttying of walls and ceiling
• Wallpapering

We believe that the space that surrounds us forms our standard of living. Therefore, we build not just square meters – we build a world in which you want to live.
We work at the intersection of precise engineering calculations, clear resource planning, skillful administration and creative inspiration.